Cherry Blossom

 

It has become a lot easier to get hold of prototyping boards in South Africa than in previous years, but while Raspberry Pi’s are easy to get hold of, sadly there are still import taxes and shipping costs to be taken into consideration. These factors push the price up considerably.

Arrow Altech Distributions have created new options for makers by producing the locally made Cherry Blossom, which is a clone of the BeagleBone Black. This home-grown alternative is available for a much more affordable price. “The locally designed, produced and supported Cherry Blossom eliminates most supply and support issues that currently exist on BBB today,” says George Cerff, Field Application Engineer at Arrow Altech Distribution, “It also enables the developer to quickly and effectively use the processing power of a high-end processor without the hardware complexity normally associated with this type of design.”

This means that you have access to the existing resources that have been created to work with the BeagleBone.  You will also find full integration with the software, which will allow access to other compatible software such as Android and Ubuntu and you have a choice of three processors:

AM3352 – 600MHz

AM3358 – 800MHz

AM3358 – 1GHz.  

Additional Features

  • 55mm x 55mm, 1.6mm PCB
  • 5V in (1A max) via USB or expansion connector.
  • 3.3V out (200mA max) via expansion connector.
  • 512MB DDR3 DRAM (256MB DRAM for AM3352 – 600MHz)
  • 2GB eMMC storage on-board (Used for boot, filesystem – no SD needed)
  • JTAG - 20 pin CTI connector
  • Serial debug header (Terminal output from Linux)
  • USB Micro – Device port (High speed)
  • Micro-SD card for storage
  • EEPROM for parameter storage
  • 3 Expansion connectors (1.27mm pitch)
  • The I/O can be re-mapped on the processor for different functions – refer to the Data Sheet. The following shows the interface primary functions:
  • oP1(50 way):
  • MMC interface (shared with on-board eMMC)
  • LCD interface (Can be used for HDMI interface – driver circuitry needed)
  • GPIO’s
  • Timers, PWMs, Counters
  • oP2 (50 way):
  • Power in (5V)
  • Battery interface (Li single cell supported)
  • 3.3V supply out (200mA max)
  • Power control
  • Reset
  • UARTS
  • I2C
  • SPI
  • Analog inputs
  • GPIO
  • Clock output
  • oP3 (30 way):
  • Ethernet MII port
  • USB Host port
  • I2C
  • Hardware configurable to run standard BeagleBone Software.

 

Contact Us

Units J16 Centurion Business Park

Bosmansdam Road

Milnerton, 7441

 

Email Address:

Tel: (021) 555-1884 | Fax: (021) 555-1763

Suite AF. 2/3 Ensign Square 4 Sookay Place Derby Downs Office Park

University Road

Westville

Durban, 4001

 

Email Adress:

Tel: (031) 279-1660 | Fax: (031) 267-3798

53-57 Yaldwyn Road

Hughes Extension

Jet Park 1459

 

Email Address:

Tel: (011) 923-9600 | Fax: (011) 923-9884

Customer Feedback

We are waiting to hear from you.


If you have any feedback please don't 
hesitate to email info@arrow.altech.co.za


Or give us a call on: (011) 923-9600 
Telefax: (011) 923-9884


Quality Management

Arrow Electronics